Sonnet-technologies Fusion RX1600RAID (Without Drives) Manual de usuario Pagina 7

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 8
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 6
Enclosure Setup
7
2. Connect each of the data cables remaining connectors to either of
the mini-SAS ports on the Sonnet RAID controller card; verify the
connectors are plugged in securely (Figure 15).
3. Connect the supplied power cables between the Fusion
RX1600RAID enclosure and a grounded wall outlet or power
strip; verify the cables are plugged in securely.
4. Push the power switch on the front of the enclosure, and then
power on your computer.
5. Refer to
Figure 15
mini-SAS
connector
mini-SAS
connector
Vista de pagina 6
1 2 3 4 5 6 7 8

Comentarios a estos manuales

Sin comentarios