Sonnet-technologies Echo Express III-R Mobile Rack Kit Manual de usuario

Busca en linea o descarga Manual de usuario para Hardware De La Computadora Sonnet-technologies Echo Express III-R Mobile Rack Kit. Sonnet Technologies Echo Express III-R Mobile Rack Kit User Manual [fr] Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 12
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
Users Guide
Mobile Rack Kit for Echo
Express III-R
Rackmount Thunderbolt
-to-PCIe Card
Expansion Chassis
Vista de pagina 0
1 2 3 4 5 6 ... 11 12

Indice de contenidos

Pagina 1 - User’s Guide

User’s Guide Mobile Rack Kit for Echo™ Express III-R Rackmount Thunderbolt™-to-PCIe Card Expansion Chassis

Pagina 2

15. Install the Echo Express III-R into its rack now. 16. Connect a Thunderbolt cable between either Thunderbolt port on the Echo chassis and a Thu

Pagina 3 - Contents

WarningsAlways follow the basic warnings listed here to avoid the risk of serious injury or death from electrical shock, short-circuiting, fire, and ot

Pagina 4

©2013 Sonnet Technologies, Inc. All rights reserved. Sonnet, the Sonnet logotype, Creativity Stored Here, Simply Fast, the Simply Fast logotype, and E

Pagina 6

1 Introduction...

Pagina 7 - Figure 2

This page left intentionally blank

Pagina 8 - Figure 3

Chapter 1 – Introduction1Congratulations on your purchase! With the Echo Express III-R Mobile Rack Kit you can install one full-height or two half-hei

Pagina 9 - Figure 5

Chapter 2 – Mobile Rack Kit Description21 – Mobile Rack Cover Plates These cover openings in the mobile rack kit where no mobile rack device is insta

Pagina 10 - Figure 6

Chapter 3 – Mobile Rack Kit and Device Installation Steps 1. Remove your Echo Express III-R Thunderbolt-to-PCIe card expansion chassis from its packa

Pagina 11

Chapter 3 – Mobile Rack Kit and Device Installation Steps 5. Remove the mobile rack kit from its packaging and set it on a flat, level surface. 6. R

Pagina 12

11. Insert the mobile rack devices into the mobile rack kit’s frame, and then using the screws you removed previously, secure the devices to the fram

Comentarios a estos manuales

Sin comentarios