Sonnet-technologies Echo Express III-R Manual de usuario

User’s Guide for Echo™ Express III-R Rackmount Thunderbolt™-to-PCIe Card Expansion Chassis

11. OPTIONAL STEP: If you are installing a PCIe card which requires additional power and must be connected to auxiliary power, locate the wire harnes

19. OPTIONAL STEP: If you are also installing the Echo Express III-R Mobile Rack Kit, refer to its user’s guide now for instructions about installin

A – Verify the Echo Express III-R is Recognized 1. With the Echo chassis powered and connected to the computer, turn on the computer. 2. From the Ap

Using Expansion Cards Without Drivers Some Thunderbolt-compatible expansion cards, like Sonnet’s Allegro™ FW800 PCIe FireWire® adapter and Sonnet’s T

WarningsAlways follow the basic warnings listed here to avoid the risk of serious injury or death from electrical shock, short-circuiting, fire, and ot

1. Remove and set aside the two screws securing the Thunderbolt interface card to the inner assembly (Figure A-1). 2. Gently push down on the edge

©2013 Sonnet Technologies, Inc. All rights reserved. Sonnet, the Sonnet logotype, Creativity Stored Here, Simply Fast, the Simply Fast logotype, Alleg

1 Introduction...

This page left intentionally blank

Chapter 1 – Introduction1Congratulations on your purchase! The Echo Express III-R is a Thunderbolt-to-PCI Express card expansion chassis; through its

Chapter 2 – Echo Express III-R Description1 – Power Indicator LED This lights when: the Echo Express III-R is powered, the Thunderbolt cable between

Chapter 2 – Echo Express III-R DescriptionInner Assembly1 – PCIe Card Bracket Locking Plate This secures installed PCIe cards and port access covers

Chapter 3 – PCIe Card Installation and Chassis Setup Steps 1. Remove the Echo Express III-R from its packaging, and then set it on a flat, level surfa

Chapter 3 – PCIe Card Installation and Chassis Setup Steps 7. OPTIONAL STEP: If you are going to install the Echo Express III-R Mobile Rack Kit, remo