Sonnet-technologies Tempo SSD PCI Express 2.5 SSD Host Card Manual de usuario descargar pdf (Pagina 6)

SSD Installation Steps

Dual SSD Installation

1. Remove and set aside the eight screws secured

to the extension plate (Figure 4).

2. Flip the card/plate assembly over, component

side up.

3. Remove the SSDs from their packaging.

4. Place an SSD label side up on top of the

Tempo SSD card with the SSD’s and

card’s connectors aligned with each other

(Figure 5).

5. Push the SSD’s connector into the Tempo SSD

card’s connector until the SSD is completely

seated (Figure 5).

6. Holding the SSD ﬁrmly against the card, ﬂip

the assembly over again.

7. Using four of the eight screws you removed

previously, secure the SSD to the Tempo SSD

card; do not overtighten the screws (Figure 6).

Figure 5

Figure 6

Figure 4

1 2 3 4 5 6 7 8 9 10

Sin comentarios

Sonnet-technologies Tempo SSD PCI Express 2.5 SSD Host Card Manual de usuario Pagina 6