Sonnet-technologies Tempo SATA E4i Serial ATA Host Adapter PCI Express Manual de usuario descargar pdf (Pagina 6)

Quick Start Guide for Tempo SATA E4i

Figure 7

Figure 8

Figure 9

drives connected

to Tempo card

Mac OS X Drive Formatting—Individual Drives (Not in a

RAID Set)

This section describes the process of formatting (initializing) individual

hard drives connected to the Tempo SATA E4i using Disk Utility under

Mac OS X Version 10.5; the process is nearly identical under Mac OS X

Version 10.4. If you intend to create a Mac OS-formatted RAID set with

the drives attached to the Tempo card, go back to “Mac OS X Drive

Formatting—RAID Sets” on the previous page.

1. Turn on your computer. During startup, one or more messages

referring to unreadable volumes will be displayed; click Initialize…

to launch Disk Utility. After Disk Utility launches, click the Initialize

button in each remaining message window.

2. If it is not already open, launch Disk Utility (Figure 7). Note that

all drives attached to the Tempo card may be identiﬁed in the

information window by their custom icon with the Sonnet S logo.

  3. Select one of the drives you want to format by clicking the drive

symbol or the “name” of the drive; a set of tabs will appear in the

right pane. Click the Partition tab, and then click on the drop down

menu beneath “Volume Scheme:” to select a number of partitions

for the volume; you may optionally choose to partition each drive

to create two or more smaller “virtual” drives (Figure 8).

4. Click to highlight a partition, and then type a name in the Name

ﬁeld; repeat for each partition (Figure 8). After formatting, each

partition will appear in the Finder window as a drive.

5. Click Apply (Figure 8).

6. When the Partition Disk window appears, click the Partition

button (Figure 9). If necessary, repeat steps 3–5 to partition any

other drives connected to the Tempo card. When partitioning and

formatting are complete, close the Disk Utility application; you can

now use your drive(s).

Support Note: See page 8 for the Tempo SATA E4i card’s port

and channel identification information.

1 2 3 4 5 6 7 8

Sin comentarios

Sonnet-technologies Tempo SATA E4i Serial ATA Host Adapter PCI Express Manual de usuario Pagina 6