Sonnet-technologies HARMONi G3 Processor Upgrade Card Manual de usuario descargar pdf (Pagina 4)

4. Move the cables off to the sides of the logic board/drive assembly (Figure 6).

5. Locate the two screws (#2 Phillips) inside the plastic handle (Figure 6), then

remove them; set the screws aside.

6. Using the handle, carefully lift the logic board/drive assembly out of the

computer (Figure 7); when it becomes possible, use both hands to support the

assembly.

7. Set the logic board/drive assembly on a clean, flat surface, with the curved

portion of the assembly facing you (Figure 8).

Remove Processor Card

1. Unhook a long edge of the metal shield covering the processor card, then

remove it from the logic board/drive assembly (Figure 9).

2. While grasping the underside the logic board/drive assembly and the top of

the heat sink clip with one hand, use a flat blade screwdriver to carefully

unhook the heatsink clip from the processor card shield (Figure 10). Remove

the clip and set it aside.

Quick Start Guide for HARMONi G3

Figure 10

Figure 9

processor

card shield

top shield

heat sink clip

screwdriver

Figure 7

Figure 8

Figure 6

logic board/drive

assembly

logic

board/drive

assembly

logic

board/drive

assembly

screwscrew

1 2 3 4 5 6 7 8 9 10 11

Sin comentarios

Sonnet-technologies HARMONi G3 Processor Upgrade Card Manual de usuario Pagina 4