Sonnet-technologies Encore_ZIF Processor Upgrade Manual de usuario descargar pdf (Pagina 77)

Installation Overview

This overview is intended for those with prior

experience installing Sonnet upgrade products or

Macintosh hardware. However, we strongly recom-

mend following the full installation instructions if

this is your ﬁrst installation of this hardware.

Installing the Encore/ZIF card takes a few easy steps:

1) Install Mac OS 9.x (only if upgrading as part of

this installation)

2) If installing an Encore/ZIF G4, install Sonnet

software

3) Turn off computer

4) Open computer

5) Remove heatsink from processor card

6) Remove processor card from ZIF socket

7) Install Encore card into ZIF socket

8) Reattach heatsink onto Encore card

9) Close computer

10) Affix the Powered by Sonnet label to front

of computer

11) Turn on your newly upgraded computer

12) To upgrade to AltiVec-enhanced software,

see Chapter 6

For more complete instructions, follow the installa-

tion procedure outlined in the pages that follow.

4-2

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 119 120

Sin comentarios

Sonnet-technologies Encore_ZIF Processor Upgrade Manual de usuario Pagina 77