Sonnet-technologies Crescendo_NuBus Processor Upgrade Card Manual de usuario Pagina 34

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 97
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 33
28
Chapter 3
Affix AV Card to Video Adapter Board
1. Before attaching the AV card to the video adapter board, you need to
bend the metal tab 90° at the end of the card with a small flatblade
screwdriver (Figure 15) so it fits in its new location.
2. Orient the video adapter board in front of you as shown in Figure 16.
Align the AV card directly over the adapter board with the connector
of the AV card facing upward (Figure 16). The holes on the AV card
should align directly with the standoffs on the adapter board.
bend tab from original position here
90°
angle
Figure 15: Bend back metal tab on AV card
Figure 16: Orient AV card over video adapter board
AV card connector facing upward
to here
Vista de pagina 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 96 97

Comentarios a estos manuales

Sin comentarios