Sonnet-technologies Fusion F3 Manual de usuario descargar pdf (Pagina 3)

Fusion F3 Speciﬁcations and Features

1 – Power Button

2 – Power Indicator LED

This indicator lights when Fusion F3 is powered.

3 – Drive Configuration Selector Switch

Select the drive conﬁguration using this switch.

4 – Drive Configuration Format Switch

This switch is mounted behind the front panel, and is

depressed with a paper clip to enable drive conﬁguration

switching.

8 – Power Cord Socket

9 – USB 2.0 Interface Port

10 – FireWire 800 Interface Ports

These ports are compatible with FireWire 400 ports on

computers and adapter cards when the correct cable is used.

11 – Locking eSATA Interface Port

This port is compatible with the included Sonnet locking

eSATA data cable and standard eSATA data cables as well.

12 – Security Slot

This slot works with Kensington

brand and similar security

locks to secure the Fusion F3 enclosure and deter theft.

13 – Rackmount Kit’s Rear Bracket Mounting Holes

These holes are used when you attach the optional

rackmount kit’s rear mounting brackets. Note: The

rackmount kit for one or two Fusion F3 systems, part

number FUS-F3-RK, is sold separately, and is available for

purchase through your reseller.

5 – Drive Configuration Indicator LEDs

These LEDs indicate the current drive conﬁguration: FAST

(RAID 0), SAFE (RAID 1), and JBOD (individual drives).

6 – Drive Presence, Activity, and Fault Indicator LEDs

These LEDs indicate the drives’ ready state (bottom LEDs),

read and write activity (all LEDs), and fault (error) status (top

LEDs). LEDs on the left light and ﬂash for drive 1, LEDs on

the right for drive 2.

7 – Ambient Light Sensor

This sensor controls the LEDs’ brightness. The lower the

ambient light level, the dimmer the LEDs will glow.

1 2 3 4 5 6 7 8

Sin comentarios

Sonnet-technologies Fusion F3 Manual de usuario Pagina 3