Sonnet-technologies Fusion F2QR Manual de usuario descargar pdf (Pagina 8)

E. Drive Formatting—Mac OS Users’ Instructions

After changing the F2QR’s drive conﬁguration using the RAID Master

application, you must format the drives using Disk Utility.

1. In the Disk Utility window, the RAID group will appear as a single

volume. Select the Fusion F2QR volume in the pane on the left, and

then click the Partition tab on the right (Figure 4).

2. Click on the drop-down menu beneath “Volume Scheme:” to

select a number of partitions for the volume; you may optionally

choose to partition each drive to create two or more smaller

“virtual” drives (Figure 5).

3. Click Options; a window will appear giving the option to select a

partition scheme that suits your needs; select a radio button and

then click OK (Figure 6).

4. Back in the main window, click Apply; a window will appear

asking you to conﬁrm that you want to partition the F2QR; click

Partition. After being partitioned, the Fusion F2QR volume will

appear on your computer’s desktop.

5. Close Disk Utility; the F2QR is ready for use.

Set Drive Conﬁguration

Support Note: If you have selected JBOD configuration for the

Fusion F2QR’s drives, two F2QR volumes will appear in the Disk

Utility window. Perform steps 1–4 for each drive.

WARNING: Formatting the drives will erase any data on

them! If there is any data on them, back it up before proceeding.

Figure 4

Figure 5

Figure 6

1 2 3 4 5 6 7 8 9 10

Sin comentarios

Sonnet-technologies Fusion F2QR Manual de usuario Pagina 8